Skip to content
Cervellati was born in 1937

From a small shop selling car spare parts and recoil pads for hunting rifles

Production lines

Rubber molding, solid and foam PU casting, Vulkollan®

Previous
Next

Cervellati

The history of Cervellati

EXSTO Cervellati company was founded in 1937 when, alongside the existing retail activity selling car products, a small-scale production of rubber recoil pads and shock absorbers for rifles was set up.

Between the ’50s and the ’70s, the company abandoned its retail activity and started specialising in the production of technical items in rubber, and grew significantly. In collaboration with a sales company, Cervellati successfully launched the first rubber “bouncing ball” onto the market, the coloured rubber ball which bounced.

 

In the 1980’s, Cervellati obtained the license to cast Vulkollan® polyurethane and started production of rubber compounds to make parts for itself and for third parties.

In the 1990’s, a plant was built for the production of polyurethane and Vulkollan®, and another for the production of compounds, with greater specialisation in fluorinated rubber. The company also obtained the Quality Certification ISO 9001:2000. It reached high levels of growth and established 20% of foreign clients both within Europe and overseas.

Equipment and machineries

The expansion of the production range and new equipment

In the last few years the company has invested heavily in cutting-edge equipment, to boost and improve the quality of the product range.

Over time, EXSTO Cervellati has consolidated its experience in producing polyurethane also expanded polyurethanes, especially for the arms industry. Some own products have been patented and equipment has been acquired to carry out certain complementary processes within the company, also for third parties: among which, die-cutting of rubber-coated fabrics and rubber sheets, sand-blasting of metal parts, rubber and metal turning by lathe, manual finishing or automatic cryogenic finishing and spray adhesiving.

Production lines

The main production lines today are:

  • Injection and compression rubber moulding: FKM, Silicon, NBR, Neoprene, EPDM, NR and reinforced
    diaphragms in rubber or rubber-coated fabric;
  • Production of cast Polyurethane in hardnesses from 50 to 93 Sh°A
  • Production of expanded Polyurethane
  • Production of Vulkollan® Bayer 65-80-92 Sh°A
  • Die-cutting of flat diaphragms in rubber-coated fabric.

EXSTO Cervellati consists of 3 production facilities and a wide range of machinery in order to meet the most diverse needs.

In the original home of the company in Via Remigia, which today has been expanded and refurbished, there is the rubber moulding department with 36 compression presses and 10 injection presses. In a specially dedicated area, there are machines for producing accessories such as 2 automatic die-cutters, three cryogenic finishing manchines, an extruder for section bars and spray painting and manual brush painting booths for adhesives. Finally, there is a modern laboratory for checking the compounds purchased and the items produced.

Production facilities

EXSTO Cervellati consists of 3 production facilities and a wide range of machinery in order to meet the most diverse needs.

In the original home of the company in Via Remigia

In the original home of the company in Via Remigia, which today has been expanded and refurbished, there is the rubber moulding department with 36 compression presses and 10 injection presses. In a specially dedicated area, there are machines for producing accessories such as 2 automatic die-cutters, three cryogenic finishing manchines, an extruder for section bars and spray painting and manual brush painting booths for adhesives. Finally, there is a modern laboratory for checking the compounds purchased and the items produced.

The second plant

The second plant is adapted to production of both compact and expanded Vulkollan and Polyurethane, and houses many Italian and German casting machines, 3 carousels, many heated casting tables, two casting furnaces and four for post-vulcanization, a centrifuge and seven reactors for the preparation of the pre-polymers. 

The third facility nearby: turning and milling

In 2018 Cervellati expanded its activity in a third facily nearby, where the following complementary processes were moved and re-organised more efficiently: turning and milling, sand-blasting and insert bonding, and wheel testing. There are also metal-washing machines and mould cleaners. An extra facility was required in order to make room for new plants to increase the production capacity and efficiency in the two historical buildings. 

In December 2019, the company Cervellati joined the French group EXSTO, well-established all over the world for plastics processing and for the manufacture of industrial parts in polyurethane. The group already counts different branches in France, USA and in Brasil, in addition to two further subsidiaries companies in Italy, one in Modena and one in Villanova Mondovì.

This website or the third parties instruments used by it make use of cookies, third parties’ as well, necessary to the functioning and useful to the purposes set out in the cookie policy. If you want to know more or deny your consent to all or some cookies, please read the cookie policy.

Privacy Settings saved!
Settings

When you visit a website, it may store or retrieve information on your browser, mainly in the form of cookies. Check your personal cookie services here.


This website or the third parties instruments used by it make use of cookies, third parties’ as well, necessary to the functioning and useful to the purposes set out in the cookie policy.
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec

Rifiuta tutti i Servizi
Accetta tutti i Servizi